J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2012;12(6):31-38.
Published online December 31, 2012.
법정 내화슬래브의 내화성능에 관한 실험 연구
여인환
An Experimental Study on Fire Resistant Performance of Legally Prescriptived Slabs
In Hwan Yeo
Abstract
This study aimed to secure the test data for improving the classification scheme of related regulations about fire resistant slabs by testing the structural member of RC, SRC and SWM slabs which legally prescriptived. Test result may be summerised as follows. (1) In the equal thickness condiion of covering, the deflection of specimen of RC, SRC and SWM showed to have equivalent performance at the rate of 40~44% in the case of 40 mm, 34~37% of 50 mm to the proportion of allowed criteria. It can be placed in order, however, RC, SRC and SWM as a view of fire resisting rate. (2) An increase of 10mm cover thickness of slab lead to the fire resisting rate up to 8% and 7% in SRC and SWM, respectively. This showed that the fire resisting rate increases in proportion to the cover and whole thickness, with few influenced by structural type. (3) The insulation performance of slabs improved by increasing whole thickness, with few influenced by structural type or covering thickness, but in the case of over the 200 mm of thickness of slab it was not further improved.
Key Words: Legally prescriptived fire resistant structure; Slab; Fire resistant performance; Thickness of covering; Type of structure
요지
본 연구는 현재 법정내화구조로 규정되어 있는 철근콘크리트조, 철골철근콘크리트조 및 철골철망모르타르조 슬래브에 대하여 재하조건에서의 내화성능을 검토함으로써 관련 규정의 분류체계 개선을 위한 자료 구축을 목적으로 하였다. 실험결과를 요약하면 다음과 같다. (1) 피복두께 40 mm의 경우 철근콘크리트조, 철골철근콘크리트조, 철골철망모르타르조의 변형량은 허용기준 대비 40~44%, 피복두께 50 mm의 경우는 34~37%로 유사한 수준의 내화성능을 보이는 것으로 나타나, 동일 피복의 경우 구조형식에 따른 내화성능 차이는 크지 않은 것을 확인하였다. 다만 근소한 차이로 철근콘크리트조, 철골철근콘크리트조, 철골철망모르타르조의 순으로 내화성능이 우수한 것으로 나타났다. (2) 슬래브 피복두께가 10 mm 증가하면 철골철근콘크리트조의 경우 8%, 철골철망모르타르조의 경우는 7%의 내화성능이 향상되는 것으로 나타났다. 이로써 슬래브의 내화성능은 피복두께와 전체 두께에 비례하여 증가하며, 구조형식의 영향은 거의 없는 것을 확인하였다. (3) 슬래브의 차열성능은 구조형식이나 피복두께의 영향보다는 전체 두께가 증가할수록 향상되었다. 하지만 슬래브 두께 200 mm이상에서는 두께가 증가하여도 차열성능에 미치는 영향이 없는 것으로 나타났다.
핵심용어: 법정내화구조; 슬래브; 내화성능; 피복두께; 구조형식


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next