J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2011;11(5):25-32.
Published online October 31, 2011.
고강도 콘크리트 및 강관의 부착성능 평가에 관한 실험적 연구
한소정, 이영학, 김대진, 김희철
Experimental Study on Bond Performance between High Strength Concrete and Steel Pipe
So-Jeong Han, Young-Hak Lee, Dae-Jin Kim, Hee-Cheul Kim
Abstract
For design of composite members, the behavior between two materials; concrete and steel pipe is considered importantly. The purpose of this paper is to evaluate the bond performance between two materials: high strength concrete and steel pipe. The composite members are manufactured by using headed shear stud as shear connector. The presence of shear connector, diameter of shear connector, ratio of diameter to height of shear connector and covering depth were considered as variables for experiment. And failure mode, maximum load and bond stress were evaluated. The test result showed that the bond stress of the specimen using shear connector with diameter of 19 mm and H/d ratio of 4 was approximately 26% than that of the reference specimen using shear connector with diameter of 13 mm and H/d ratio of 4. The bond stress of the specimen using shear connector with diameter of 13 mm and H/d ratio of 5.5 were 12% than that of the reference specimen. The test results indicate that the bond strength between concrete and steel pipe is most improved when the diameter increases and H/d ratio is up to 5.5.
Key Words: Bond Stress; Shear Connector; High Strength Concrete; Steel Pipe
요지
합성부재의 설계에 있어서 콘크리트와 강관 사이의 거동은 매우 중요하게 고려된다. 본 연구의 목적은 고강도 콘크리트와 강관 사이의 부착 성능을 평가하는 것이다. 합성부재에 전단 연결재로 Headed Shear Stud를 사용하였고, 전단 연결재의 유무, 전단 연결재의 지름, 전단 연결재의 지름 대 높이의 비(H/d ratio) 및 콘크리트 피복 두께를 변수로 하여 실험을 수행하였으며, 파괴양상, 최대내력 및 부착응력의 측면에서 고강도 콘크리트와 강관의 부착성능을 평가하였다. 실험 결과, 축부 지름이 19 mm이고 H/d ratio가 4인 전단 연결재가 적용된 시험체는 축부 지름이 13 mm이고, H/d ratio가 4인 전단 연결재가 적용된 표본 시험체를 기준으로 26% 향상된 부착응력을 나타내었다. 한편 축부 지름이 13 mm이고, H/d ratio가 5.5인 전단 연결재가 적용된 시험체는 표본 시험체를 기준으로 12% 향상된 부착응력을 나타내었다. 이러한 실험 결과를 통하여 전단 연결재의 지름이 증가할수록, 또한 H/d ratio가 5.5일 때 고강도 콘크리트와 강관의 부착성능이 가장 우수한 것을 확인하였다.
핵심용어: 부착응력; 전단 연결재; 고강도 콘크리트; 강관


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next