1. Alessandrini, E.R, Stafoggia, M, Faustini, A, et al (2016) Association between short-term exposure to PM2.5 and PM10 and mortality in susceptible subgroups:A multisite case-crossover analysis of individual effect modifiers.
American journal of epidemiology, Vol. 184, No. 10, pp. 744-754. 10.1093/aje/kww078. 27780802.
2. Arao, Y, Nakamura, S, Tomita, Y, Takakuwa, K, Umemura, T, and Tanaka, T (2014) Improvement on fire retardancy of wood flour/polypropylene composites using various fire retardants.
Polymer Degradation and Stability, Vol. 100, pp. 79-85. 10.1016/j.polymdegradstab.2013.12.022.
3. Bae, H.J (2014) Effects of Short-term Exposure to PM10 and PM2.5 on Mortality in Seoul.
Journal of Environmental Health Sciences, Vol. 40, No. 5, pp. 346-354. 10.5668/JEHS.2014.40.5.346.
4. d' Almeida, A.L.F.S, Barreto, D.W, Calado, V, and d'Almeida, J.R.M (2008) Thermal analysis of less common lignocellulose fibers.
Journal of Thermal Analysis and Calorimetry, Vol. 91, No. 2, pp. 405-408. 10.1007/s10973-007-8606-6.
5. Goo, J.H (2014) Studies on the Morphology of Smoke Particles for Each Type of Fire by Using Steady State Tube Furnace.
Fire Science and Engineering, Vol. 28, No. 1, pp. 44-51. 10.7731/KIFSE.2014.28.1.044.
6. ISO 10808 (2010)
Nanotechnologies–Characterization of Nanoparticles in Inhalation Exposure Chambers for Inhalation Toxicity Testing.
7. ISO 13344 (2015)
Estimation of the Lethal Toxic Potency of Fire Effluents.
8. ISO 19702 (2015)
Guidance for Sampling and Analysis of Toxic Gases and Vapours in Fire Effluents Using Fourier Transform Infrared (FTIR) Spectroscopy.
9. ISO 19706 (2007)
Guidelines for Assessing the Fire Threat to People.
10. Kim, N.K, Cho, N.W, and Rie, D.H (2016) A Study on the Risk of Particulate Materials Included in the Combustion Products of Building Materials.
Fire Science and Engineering, Vol. 30, No. 1, pp. 43-48. 10.7731/KIFSE.2016.30.1.043.
11. Kim, N.K, Park, J.H, and Cho, N.W (2016) Toxicity Factor Analysis through the Exposure Experiment of the Combustion Products on Wood-Based Materials.
Fire Science and Engineering, Vol. 30, No. 6, pp. 57-63. 10.7731/KIFSE.2016.30.6.057.
12. KS, F (2006)
Fire Retardant Testing Method of Interior Finishes and Structures.
13. Kweon, O.S (2014) A Study on the Toxicity Evaluation of Combustion Gas of Fire Resistive Coating of Structural Members Using FT-IR.
J. Korean Soc. Hazard Mitig, Vol. 14, No. 6, pp. 245-249. 10.9798/KOSHAM.2014.14.6.245.
14. Lee, D.H, and Kong, Y.K (2005) A study on combustion gas toxicity of polymeric materials using FTIR gas analysis.
J. Korean Soc. Hazard Mitig, Vol. 5, No. 4, pp. 79-84.
15. Lelieveld, J, Evans, J.S, Fnais, M, et al (2015) The contribution of outdoor air pollution sources to premature mortality on a global scale.
Nature, Vol. 525, pp. 367-371. 10.1038/nature15371. 26381985.
16. Ministry of Land, Infrastructure, and Transport (2015).
Flame Retardant Performance and Flame Spread Prevention Structural Standards of Building Finishing Materials. Ministry of Land, Infrastructure, and Transport Act 2015-744.
17. National Institute of Forest Science Notification (2016).
Specifications and Quality Standards of Timber Products. No. 2016-6.
18. NES 713 (1985)
Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials. Issue 3.
19. Park, Y.J, and Lee, H.P (2015) Identification on Carbon Oxide and Smoke Release Change of Aging Wire Cables.
J. Korean Soc. Hazard Mitig, Vol. 15, No. 4, pp. 107-113. 10.9798/KOSHAM.2015.15.4.107.
20. Russell, W.M.S, and Burch, R.L (1959).
The Principles of Humane Experimental Technique. Methuen & Co, London.
21. SFPE (2002).
The SFPE Handbook of Fire Protection Engineering. 3rd edition. NFPA, MA, US.