J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2012;12(6):247-258.
Published online December 31, 2012.
SWMM을 이용한 홍수유출 모의의 합리적 적용에 관한 연구
강태욱, 이상호
A Study for a Reasonable Application of the SWMM to Watershed Runoff Event Simulation
Taeuk Kang, Sangho Lee
Abstract
Rainfall runoff process differs depending on if it occurs in a rural area or an urban area. While surface flow is dominant in an urban area, in a rural area, groundwater flow is also important. However, in Korea, most studies for a watershed runoff event simulation by the storm water management model (SWMM) have used only the surface flow module regardless of the runoff characteristics for a basin. The purpose of the study is to evaluate application results of the SWMM for a rural area and to suggest the necessity of considering runoff characteristics of a basin in a watershed runoff event simulation. Two basins, which can represent urban and rural areas, are selected: the Guro 1 Pumping Station Basin and the Milyang Dam Basin. Watershed runoff event simulations were conducted by including the groundwater module of the SWMM and the results were derived by an automatic calibration. The calibration results for the watershed runoff event simulation model of the Guro 1 Pumping Station Basin were quite similar to the observed hydrograph, even when the groundwater module is not included. On the other hand, calibration results for the watershed runoff event simulation model of the Milyang Dam Basin were poorly done when the groundwater module is not considered. When we derived the calculated runoff hydrograph by the watershed runoff event simulation model with the groundwater module for the Milyang Dam Basin, the results were well fitted into the observed data. Thus, runoff characteristics should be considered for a watershed runoff event simulation by the SWMM.
Key Words: watershed runoff event simulation; runoff characteristics; SWMM; automatic calibration
요지
도시유역과 전원유역의 유출 형태는 서로 상이하다. 도시유역에서는 지표면 유출이 지배적인 반면, 전원유역의 경우 지표면 유출은 물론 지하수 유출도 큰 비중을 차지한다. 하지만 우리나라에서는 SWMM을 이용한 홍수유출 해석 시, 대상유역의 유출 특성을 고려하지 않고 지표면 유출만을 모의한 사례가 대부분이다. 본 연구의 목적은 전원유역에 대한 SWMM의 적용성을 평가하고, 유역의 유출 특성을 고려한 홍수유출 모의의 필요성을 제시하는데 있다. 이를 위해 모형 적용의 대상유역을 도시유역인 구로1 빗물펌프장 배수유역과 전원유역인 밀양댐 배수유역의 두 곳으로 선정하였다. 홍수유출 모의는 SWMM의 지하수 유출 계산 모듈의 포함 유무에 따라 수행되었고, 홍수유출 모의의 적절성은 자동 보정을 통해 검토되었다. 그 결과, 도시유역인 구로1 빗물펌프장 배수유역에서는 홍수유출 모의 시 지하수 모듈을 고려하지 않더라도 비교적 관측 수문곡선을 잘 모사하였다. 반면에 유역의 대부분이 투수 지역인 밀양댐 배수유역에서는 지하수 유출 계산 모듈을 고려하지 않을 경우, 계산된 수문곡선의 오차는 매우 크게 나타났다. 이와 달리, 밀양댐 배수유역의 홍수유출 모의 모형에 지하수 모듈을 고려할 경우, 계산된 결과는 관측자료를 잘 모사하였다. 따라서 SWMM을 이용한 홍수유출 해석 시 대상유역의 유출 특성을 고려할 필요가 있다.
핵심용어: 홍수유출 모의; 유역 특성; 자동 보정


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next