1. Abdulla, K.F, Cunningham, L.S, and Gillie, M (2017) Simulating masonry wall behaviour using a simplified micro-model approach.
Engineering Structures, Vol. 151, pp. 349-365.
2. ASTM E519-15 (2015) Standard test method for diagonal tension (shear) in masonry assemblages.
American Society for Testing and Materials (ASTM).
3. Baek, E.R, Kim, J.H, Lee, S.H, and Oh, S.H (2014) Nonlinear analysis model considering failure mode of unreinforced masonry wall.
Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 18, No. 4, pp. 33-40.
4. Beall, C (2004).
Masonry design and detailing:For architects, engineers, and contractors. 5th ed. New York, USA: McGraw-Hill.
5. D'Altri, A.M, de Miranda, S, Castellazzi, G, and Sarhosis, V (2018) A 3D detailed micro-model for the in-plane and out-of-plane numerical analysis of masonry panels.
Computers and Structures, Vol. 206, pp. 18-30.
6. Heo, J.S, and Lee, S.H (2009) Analytical study on the seismic capacity for existing masonry building in Korea.
Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 13, No. 6, pp. 75-87.
7. Hong, J.M, Shin, D.H, and Kim, H.J (2018) Nonlinear analytical model of unreinforced masonry wall using fiber and shear spring elements.
Journal of the Computational Structural Engineering Institute of Korea, Vol. 31, No. 6, pp. 283-291.
8. Kang, W.J (2010) Nonlinear finite element analysis of unreinforced masonry walls under shear and compression.
Master's thesis, Seoul National University of Science and Technology.
9. Kim, J.H, and Kwon, K.H (2002) Analysis on in-plane behavior of unreinforced masonry walls.
Journal of the Earthquake Engineering Society of Korea, Vol. 6, No. 3, pp. 1-10.
10. Korea Infrastructure Safety Corporation (KISTEC) (2019)
Research on the previous facilities (building) seismic performance evaluation and improvement methods.
11. Korea Meteorological Administration (KMA) (2020)
A total of 88 earthquakes occurred in Korea in 2019, February 28, 2020,Press release.
12. KS L 4201 (2019) Clay brick.
Korean Agency for Technology and Standards (KATS).
13. KS L 5220 (2018) Dry ready mixed cement mortar.
Korean Agency for Technology and Standards (KATS).
14. Kyriakides, M.A, Hendriks, M.A.N, and Billington, S.L (2012) Simulation of unreinforced masonry beams retrofitted with engineered cementitious composites in flexure.
Journal of Materials in Civil Engineering, Vol. 24, No. 5, pp. 506-515.
15. Lourenço, P.B, and Rots, J.G (1997) Multisurface Interface Model for Analysis of Masonry Structures.
Journal of Engineering Mechanics, Vol. 123, No. 7, pp. 660-668.
16. Milani, G, Lourenço, P.B, and Tralli, A (2006) Homogenised limit analysis of masonry walls, Part I:Failure surfaces.
Computers &Structures, Vol. 84, No. 3-4, pp. 166-180.
17. Ministry of Land, Transport and Maritime Affairs (MLTM). 2010)
20 Points for seismic reinforcement of small-scale buildings.
18. National Emergency Management Agency (NEMA). 2011)
For masonry buildings, seismic reinforcement against earthquakes, February 9, 2011, Press Release.
19. Türkmen, Ö.S, De Vries, B.T, Wijte, S.N.M, and Vermeltfoort, A.T (2019) In-plane behaviour of clay brick masonry wallettes retrofitted with single-sided fabric-reinforced cementitious matrix and deep mounted carbon fibre strips.
Bulletin of Earthquake Engineering, Vol. 18, No. 2, pp. 725-765.