J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2008;8(6):113-120.
Published online December 31, 2008.
분단위 자료를 이용한 강우의 공간상관구조 분석
유철상, 박창열, 김경준, 전경수
Analysis of Rainfall Spatial Correlation Structure Using Minutely Data
Chul-Sang Yoo, Chang-Yeol Park, Kyoung-Jun Kim, Kyung-Soo Jun
Abstract
This study analyzed the spatial correlograms of minutely rainfall data with respect to various accumulation times. A bivariate mixed lognormal distribution was applied for rainfall modelling. A total of 26 minutely rainfall data sets from rain gauge stations in the central part of Korean peninsula were analyzed, also repeated for several storm types like Jang-Ma, typhoon and convective storms for their comparison. The accumulation times 1, 2, 3, 5, 10, 30 and 60 minutes were considered in this study. As results, it was found that the minutely rainfall data available was not good enough for estimating minutely rainfall intensity at ungaged locations. It seems more practical to use the hourly rainfall data with much higher rain gauge density, if proper methods for interpolation and data dis-aggregation are provided.
Key Words: Minutely rainfall data; Correlogram; Lognormal distribution
요지
본 연구에서는 분단위 강우자료(MMR)를 이용하여 시간해상도에 따른 강우의 공간상관구조 특성을 분석하였다. 이를 위해 이 변량 혼합대수정규분포를 이용하여 강우를 모형화하였다. 본 연구에서의 분석은 중부지역의 26개 우량관측소 지점자료를 이용 하였으며, 호우 발생 특성별(장마, 태풍, 대류성 강우)로 수행하여 서로 비교될 수 있도록 하였다. 집성시간은 1, 2, 3, 5, 10, 30, 60분을 적용하였다. 그 결과, 현재의 분단위 관측지점 자료는 임의 지점의 분단위 강우강도로 내삽하여 추정하는데 적절하지 않음을 확인하였다. 만일 적절한 자료분해 및 내삽 방법론이 구비된다면, 분단위 관측지점 자료를 이용하는 것보다 시자료와 같이 밀도 있는 관측망의 자료를 이용하는 것이 보다 현실적인 분단위 강우강도 추정 방안이 될 수 있을 것이다.
핵심용어: 분단위 강우자료; 공간상관함수; 대수정규분포


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next