Beycioğlua, A, and Aruntas, H.Y (2014) Workability and mechanical properties of self-compacting concretes containing LLFA, GBFS and MC.
Construction and Building Materials, Vol. 73, pp. 626-635. 10.1016/j.conbuildmat.2014.09.071.
Cunha, S, Aguiar, J.B, Ferreira, V.M, and Tadeu, A (2015) Mortars based in different binders with incorporation of phase change materials:physical and mechanical properties.
European Journal of Environmental and Civil Engineering, Vol. 19, pp. 1216-1233. 10.1080/19648189.2015.1008651.
Cunha, S, Lima, M, and Aquiar, J.B (2016) Influence of adding phase change materials on the physical and mechanical properties of cement mortars.
Construction and Building Materials, Vol. 127, pp. 1-10. 10.1016/j.conbuildmat.2016.09.119.
Eddhahak-Ouni, A.E, Drissi, S, Colin, J, Neji, J, and Care, S (2014) Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials(PCMs).
Applied Thermal Engineering, Vol. 64, No. Issue 1-2, pp. 32-39. 10.1016/j.applthermaleng.2013.11.050.
Gajada, J, and Vangeem, M (2002) Controlling Temperatures in Mass Concrete.
Concrete International, Vol. 24, No. Issue 1, pp. 58-62.
Hawes, D.W, Banu, D, and Feldman, D (1990) Latent heat storage in concrete II.
Solar Energy Mater, Vol. 21, No. Issue 1, pp. 61-80. 10.1016/0165-1633(90)90043-Z.
Hawes, D.W, Banu, D, and Feldman, D (1992) The stability of phase change materials in concrete.
Solar Energy Mater Solar Cells, Vol. 27, No. Issue 2, pp. 103-118. 10.1016/0927-0248(92)90113-4.
Hawlader, M.N.A, Uddin, M.S, and Khin, M.M (2003) Microencapsulated PCM thermal-energy storage system.
Applied Energy, Vol. 74, No. Issue 1-2, pp. 195-202. 10.1016/S0306-2619(02)00146-0.
Hunger, M, Entrop, A.G, Mandilaras, I, Brouwers, H.J.H, and Founti, M (2009) The behavior of self-compacting concrete containing micro-encapsulated phase change materials.
Cement and Concrete Composites, Vol. 31, No. Issue 10, pp. 731-743. 10.1016/j.cemconcomp.2009.08.002.
Huntzinger, D.N, and Eatmon, T.D (2009) A life-cycle assessment of Portland cement manufacturing:comparing the traditional process with alternative technologies.
Journal of Cleaner Production, Vol. 17, No. Issue 7, pp. 668-675. 10.1016/j.jclepro.2008.04.007.
Jang, S.J, Kim, B.S, Kim, S.W, Park, W.S, and Yun, H.D (2016) Hydration Heat and Strength Characteristics of Cement Mortar with Phase Change Materials (PCMs).
Journal of the Korea Concrete Institute, Vol. 28, No. No. 6, pp. 665-672. 10.4334/JKCI.2016.28.6.665.
Jayalath, A, Nicolas, R.S, Sofi, M, Shanks, R, Ngo, T, Aye, L, and Mendis, P (2016) Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials.
Construction and Building Materials, Vol. 120, pp. 408-417. 10.1016/j.conbuildmat.2016.05.116.
Kim, H.S, and Lee, D.U (2009) A Study on the Properties of Hydration Heat of Mass Concrete using Blast- Furnace Slag Cement and Fly-ash.
Journal of the Regional Association of Architectural Institute of Oorea, Vol. 11, No. Issue 4, pp. 291-297.
Korea Concrete Institute (2012)
Concrete Structure Design Code.
KSL ISO 679 (2011).
Methods of Testing Cements Determination of strength. Korean Standards Association, p 9-11.
Ling, T.C, and Poon, C.S (2013) Use of phase change materials for thermal heat storage in concrete – an overview.
Constr. Build. Mater, Vol. 46, pp. 55-62. 10.1016/j.conbuildmat.2013.04.031.
Meshgin, P, and Yunping, X (2012) Effect of Phase-Change Materials on Properties of Concrete.
ACI Materials Journal, Vol. 109, No. Issue 1, pp. 71-80.
Mucteba, U, and Mansur, S (2011) Performance of self-compacting concrete containing different mineral admixtures.
Construction and Building Materials, Vol. 25, No. Issue 11, pp. 4112-4120.
Olivier, J.G.J, Janssens-Maenhout, G, Muntean, M, and Peters, J.A.H.W (2016).
Trends in Global CO2 Emissions: 2016 Report. PBL Netherlands Environmental Assessment Agency, p 64-66.
Park, C.K, Lee, S.H, Kim, H.J, Kim, S.J, and Lee, T.W (2008) The Characteristics of Strength of Development and Hydration Heat on High Volume Fly-Ash Concrete.
Journal of the Korea Concrete Institute, Vol. 20, No. Issue 1, pp. 417-420.
Seo, T.S, Lim, C.K, and Cho, Y.G (2014) Experimental Study on Hydration Heat Control of Mass Concrete by Vertical Pipe Cooling Method.
Journal of the Korea Concrete Institute, Vol. 26, No. Issue 1, pp. 911-912.
Siad, H, Mesbah, H.A, Khelafi, H, Kamali-Bernard, S, and Mouli, M (2010) Effect of mineral admixture on resistance to sulphuric and hydrochloric acid attacks in selfcompacting concrete.
Canadian Journal of Civil Engineering, Vol. 37, No. Issue 3, pp. 441-449. 10.1139/L09-157.
Yang, K.H, Jung, Y.B, Cho, M.S, and Tae, S.H (2015) Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete.
Journal of Cleaner Production, Vol. 103, pp. 774-783. 10.1016/j.jclepro.2014.03.018.
Yum, C.S, Bae, W.M, Kim, M.S, Beak, D.I, and Kim, K.M (2006) A Study on Field Applications of Hydration Heat Control in the Mass Concrete Using Oscillating Capillary Tube Heat Pipe.
Journal of the Korea Concrete Institute, Vol. 18, No. Issue 1, pp. 413-416.
Zalba, B, Marin, J.M, Cabeza, L.F, and Mehling, H (2003) Review on thermal energy storage with phase change:materials, heat transfer analysis and applications.
Applied Thermal Engineering, Vol. 73, No. Issue 3, pp. 251-283. 10.1016/S1359-4311(02)00192-8.
Zhao, H, Sun, W, Wu, X, and Gao, B (2015) The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures.
Journal of Cleaner Production, Vol. 95, pp. 66-74. 10.1016/j.jclepro.2015.02.050.