J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2011;11(5):1-8.
Published online October 31, 2011.
니켈-크롬 합금강바를 이용한 교각부 내진보강 성능개선
장일영, 김성수, 박종권, 김성겸
Anti-seismic Capacity Improvement of Bridge Pier by Nickel-Chrome Alloy Bar
Il-Young Jang, Sung-Soo Kim, Jong-Kwon Park, Seong-Kyum Kim
Abstract
The newly bridge, as amended by the Highway Bridge Seismic design standards and by performing the construction. But, prior to the construction standards apply seismic. Reinforced concrete piers may be vulnerable to an earthquake by the lateral loads. In this study, modeling performed seismic reinforcement and reinforcement techniques through experiments of various types of best seismic reinforcement techniques. It has not been applied Seismic techniques to apply to the existing bridge seismic reinforcement. So, It will be able to performance. In this paper, reinforced through the numerical modeling for the pier reinforcement. The results compared to the after reinforcement against. Displacement was confirmed that more reduction. A non-seismic design for a circular pier models produced. It subject to reduction as a high seismic reinforcement material properties of nickel-chrome alloy using a strip, spiral, horizontal and vertical mixed-seismic reinforcement. It was applied to the experimental. As a result, that the form of a spiral is better than the horizontal and vertical mixed stripes type and strip shape in seismic reinforcement performance was confirmed.
Key Words: Seismic reinforcement; Nickel-Chrom alloy; Circular Pier; Earthquake
요지
신설된 교량의 경우 최근 개정된 도로교 설계기준에 의하여 내진설계를 수행하여 시공되고 있으나, 내진설계규정이 적용되기 이전에 시공되어 사용 중인 철근콘크리트 교각의 경우에는 지진에 의한 횡하중에 대해 취약할 수 있다. 본 연구에서 수행한 내진보강 모델링 및 실내실험을 통해 여러 형태의 보강기법 중에서 가장 우수한 내진보강 성능을 발휘하는 보강기법을 도출하고, 그 기법을 내진설계가 적용되지 않은 기존교량에 적용시켜 우수한 내진보강 성능을 발휘할 수 있을 것이다. 본 논문에서는 내진보강된 교각에 대하여 모델링을 통한 수치해석결과 보강전에 비하여 보강후 변위에 대하여 감소하는 것을 확인하였다. 실제 비내진 설계된 원형 교각모델에 대하여 축소실험체를 제작하고 내진보강 재료로써 우수한 성질의 니켈-크롬 합금강바를 이용하여 띠형, 나선형, 수평수직 혼합형의 보강을 내진보강에 적용하여 실험하였으며, 그 결과 띠형과 띠, 수직 혼합형의 보강 형태보다는 나선형태의 내진보강이 가장 우수한 내진보강 성능을 나타냄을 확인 하였다.
핵심용어: 내진보강; 내진설계; 니켈-크롬 합금강바; 원형 교각; 지진


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next