J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2011;11(3):127-132.
Published online June 30, 2011.
강원도 산간지역의 토사유출량 산정
권혁재
Sediments Yield Estimation of Gangwon Mountain Region in Korea
Hyuk-Jae Kwon
Abstract
In this study, calculation results of sediments yield prediction models were compared with the amount of dredging data for the Inje, Gangwon mountain region of Korea. MSDPM and LADMP were used as a sediments prediction model which was calibrated and modified to calculate the sediments yield of Korean mountain region. Both sediments yield prediction models were modified by using Threshold Maximum Rainfall Intensity and Total Minimum Rainfall Intensity and correction coefficient. After comparing with the amount of dredging, it was found that results of MSDPM is more accurate than the results of LADMP. Difference of results of MSDPM and the amount of dredging is 27.6% and difference of results of LADMP and the amount of dredging is 50.6%. Both sediments yield prediction models which were calibrated in this study can be used to calculate the sediments yield for the Korean mountain region.
Key Words: Sediments; Debris dam; Threshold maximum 1-hr Rainfall Intensity; Total minimum rainfall amount; Watershed area
요지
본 연구에서는 강원도 인제군 산간지역에 대해 토사량 예측모형을 이용하여 산정한 토사량과 실제 준설량을 비교하였다. MSDPM과 LADMP를 한국지형에 맞게 보정하고 수정하여 사용하였다. 두 식 모두 토사 유발 강우강도와 토사 유발 강우량 개념을 도입하였으며 보정계수를 사용하여 식을 보정하였다. 계산 결과와 준설량을 비교한 결과, MSDPM의 계산결과가 LADMP보다 더 잘 일치하는 것으로 나타났다. MSDPM의 계산결과는 준설량과 약 27.6% 절대치 차이가 났으며 LADMP의 계산결과는 준설량과 약 50.6%의 절대치 차이를 나타냈다. 본 연구에서 보정된 두 개의 토사량 예측모형은 우리나라 산간지역의 토사량 예측을 위해서 사용 가능할 것으로 판단된다.
핵심용어: 토사; 사방댐; 토사 유발 강우강도; 토사 유발 강우량; 유역면적


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next