1. ASTM C944/C944M. Standard test method for abrasion resistance of concrete or mortar surfaces by the rotating-cutter method (2012)
American Society for Testing Materials.
2. Han, S.H (2000) Strength characteristics of concrete containing blast-furnace slag as coarse aggregate.
Journal of Korea Concrete Institute, Vol. 12, No. 5, pp. 59-68.
3. Hong, C.H, Kim, MH, and Yang, C.S (2006) Development of environmentally favorable porous concrete and water purification characteristics by the pavement system.
Journal of the Environmental Sciences, Vol. 15, No. 11, pp. 1045-1052.
4. Jeon, J.H, Choi, D.H, and Kim, T.D (2009) LIDMOD development for evaluating low impact development and its applicability to total maximum daily loads.
Journal of Korean Society on Water Quality, Vol. 25, No. 1, pp. 58-68.
5. KSF 2375. (2016). Standard test method for measuring surface frictional properties using the british pendulum tester (
Korean Agency for Technology and Standards.
6. KSF 2405. (2017). Standard test method for compressive strength of concrete (
Korean Agency for Technology and Standards.
7. KSF 2408. (2016). Standard test method for flexural strength of concrete (
Korean Agency for Technology and Standards.
8. KSF 2456. (2018). Standard test method for resistance of concrete to rapid freezing and thawing (
Korean Agency for Technology and Standards.
9. KSF 4419. (2016). Concrete interlocking block for sidewalk and road (
Korean Agency for Technology and Standards.
10. Lee, H.G (2019) Research trends and applications of industrial by-product (bottom ash) for concrete materials.
Magazine of Recycled Construction Resources (RCR) Korean Recycled Construction Resources Institute, Vol. 14, No. 3, pp. 39-43.
11. Lee, J.M, Lee, Y.S, Choi, J.S, and Kang, S.U (2015) A study on the application and effect analysis monitoring of LID technique in new town city (I) LID technique selection and optimum size estimate.
J Korean Soc. Hazard Mitig, Vol. 15, No. 5, pp. 291-299.
12. Lee, S.Y, Kim, I.T, Mun, S.H, and Kwon, S.A (2012) Study on the functional evaluation of permeable asphalt concrete pavement in Seoul City.
International Journal of Highway Engineering, Vol. 14, No. 3, pp. 33-39.
13. Ohama, Y (1995) Handbook of polymer-modified concrete and mortars:Properties and process technology.
Park Ride, New Jersey, USA:Noyes Publications.
14. Park, S.G, and Kim, J.M (2012) Present status and recycling technology for bottom ash in Korea.
Journal of the Korean Recycled Construction Resources Institute, Vol. 7, No. 1, pp. 9-12.
15. Park, S.H, Lee, J.B, and Kim, S.S (2016) The durability of the concrete using bottom ash as fine aggregate.
Journal of the Korean Recycled Construction Resources Institute, Vol. 4, No. 4, pp. 349-355.
16. Pyke, C, Warren, M.P, Johnson, T, LaGro, J Jr, Scharfenberg, J, Groth, P, et al (2011) Assessment of low impact development for managing stormwater with changing precipitation due to climate change.
Landscape and Urban Planning, Vol. 103, No. 2, pp. 166-173.
17. Yang, H.K (2006) Impact of climate change on hydrological disasters.
Journal of the Korean Geomorphological Association, Vol. 13, No. 3, pp. 45-54.