1. Albusoda, B.S, Al-Saadi, A.F, and Jasim, A.F (2018) An experimental study and numerical modeling of laterally loaded regular and finned pile foundations in sandy soils.
Computers and Geotechnics, Vol. 102, pp. 102-110.
2. American Association of State Highway and Transportation Officials (AASHTO) (2012).
AASHTO LRFD bridge design specifications. Washington, DC, USA: AASHTO.
3. American Petroleum Institute (API) (2002).
Recommended practice for planning, designing and constructing fixed offshore platforms-Working stress design. Washington, DC, Unitied States:API.
4. Ashour, M, and Ardalan, H (2011) Employment of the
p-multiplier in pile-group analysis.
Journal of bridge engineering, Vol. 16, No. 5, pp. 612-623.
5. Bogard, D, and Matlock, H (1983, April) Procedures for analysis of laterally loaded pile groups in soft clay.
Geotechnical Practice in Offshore Engineering, ASCE, Vol. 22, No. 5, pp. 499-535.
6. Brown, D.A, O'Neill, M.W, McVay, M, El Naggar, M.H, and Chakraborty, S (2001).
Static and dynamic lateral loading of pile groups. National Cooperative Highway Research Program, Washington, DC:National Academy Press.
7. Choi, Y, and Ahn, J (2020) Evaluation of py curves and
p-multiplier of pile groups corresponding to sand properties change based on 3D numerical analysis.
Journal of the Korean Society of Hazard Mitigation, Vol. 20, No. 4, pp. 207-217.
8. Dao, T.P.T (2011).
Validation of PLAXIS embedded piles for lateral loading. Master's thesis, Delft University of Technology.
9. Dou, H, and Byrne, P.M (1996) Dynamic response of single piles and soil pile interaction.
Canadian Geotechnical Journal, Vol. 33, No. 1, pp. 80-96.
10. Fayyazi, M.S, Taiebat, M, Finn, W.L, and Ventura, C.E (2012). Evaluation of
p-multiplier method for performance-based design of pile groups.
Second International Conference on Performance-Based Design in Earthquake Geotechnical Engineering. Taormina, Italy.
11. Fayyazi, M.S, Taiebat, M, and Finn, W.L (2014) Group reduction factors for analysis of laterally loaded pile groups.
Canadian Geotechnical Journal, Vol. 51, No. 7, pp. 758-769.
12. Korean Geotechnical Society (KGS) (2018).
Explanation of the foundation design standards for structures. Seoul:KGS.
13. Marjanović, M, Vukićević, M, König, D, Schanz, T, and Schäfer, R (2016) Modeling of laterally loaded piles using embedded beam elements.
Proceedings of International Conference of Contemporary Achievements in Civil Engineering 2016, pp. 349-358.
14. Matlock, H (1970, April)
Correlation for design of laterally loaded piles in soft clay. In Offshore technology conference. OnePetro.
15. O'Neil, M.W, and Murchison, J.M (1983).
An evaluation of p-y relationships in sand. Report of the American Petroleum Institute.
16. Reese, L.C, Cox, W.R, and Koop, F.D (1974, May)
Analysis of laterally loaded piles in sand. In Offshore Technology Conference. OnePetro.
17. Reese, L.C, and Welch, R.C (1975) Lateral loading of deep foundations in stiff clay.
Journal of the Geotechnical Engineering Division, Vol. 101, No. 7, pp. 633-649.
18. Rollins, K.M, Peterson, K.T, and Weaver, T.J (1998) Lateral load behavior of full-scale pile group in clay.
Journal of Geotechnical and Geoenvironmental Engineering, Vol. 124, No. 6, pp. 468-478.
19. Sadek, M, and Shahrour, I (2004) A three dimensional embedded beam element for reinforced geomaterials.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 28, No. 9, pp. 931-946.
20. Skels, P, and Bondars, K (2017) Applicability of small strain stiffness parameters for pile settlement calculation.
Procedia Engineering, Vol. 172, pp. 999-1006.